Home › Tools › Materials calculator
Construction materials calculator
Six site calculations in one place: bricks and blocks (number and mortar), concrete (cement, sand, gravel, water), render, screed, tiling (tiles, adhesive, grout) and paint. Sizes and mixes can be edited.
The formulas
- Blocks per m² = 1 / ((length + joint) × (height + joint)). A 40 × 20 cm block with a 1 cm joint gives 11.6 blocks per m²; 12.5 is often counted on site to allow for cuts. The mortar is the volume of the joints.
- Concrete: for 1 m³ at 350 kg, 350 kg of cement (7 bags of 50 kg), about 400 L of sand, 800 L of gravel and 175 L of water.
- Render and screed mortar: area × thickness, plus wastage; 1 m³ of mortar needs about 1 m³ of sand and the cement mass of its mix.
- Tiling: area × (1 + wastage) / area of one tile; adhesive 5 to 6 kg/m² with single or double buttering; grout according to the joint width and thickness.
- Paint: area × coats / coverage (in m² per litre, shown on the tin).
These are ordering quantities. The mix of a structural concrete follows the engineer's design and the standard in force.
Frequently asked questions
How many bags of cement for 1 m³ of concrete?
7 bags of 50 kg for concrete at 350 kg/m³, 6 for 300 kg/m³, 5 for 250 kg/m³.
How many bricks for a 10 m² wall?
It depends on the size: about 125 blocks of 40 × 20 cm, or 160 bricks of 30 × 20 cm, wastage included. The tool computes it for any size.
How much adhesive for tiling?
About 4 to 5 kg/m² for tiles up to 30 × 30 cm, 6 to 8 kg/m² with double buttering for large formats.
What thickness for a screed?
4 to 6 cm for a standard bonded or unbonded screed; more over insulation or with underfloor heating.