Home › Survey calculations › Area from coordinates
Area from coordinates
Paste the coordinates X, Y of the vertices of a plot, a parcel or a building: the area (m², hectares, ha a ca), the perimeter, the length and bearing of each side appear immediately. Gauss method, the same as in surveying software.
Result
How to use the calculator
- Copy into Excel the columns Vertex, X, Y from your plan or survey, and paste them into the first cell of the table (or open a TXT or CSV file).
- The vertices must follow each other in the order of the outline, in either direction.
- The area, the perimeter and the table of sides appear; export the outline as DXF (closed polyline and points) or in CSV.
The Gauss method
For a polygon with n vertices (Xi, Yi) travelled in order:
S = ½ × | Σ (Xi × Yi+1 − Xi+1 × Yi) |, vertex n + 1 being the first one.
With six-digit coordinates, the products are huge: the same number is first subtracted from all X and all Y. The area does not change and the calculation stays accurate. The tool does it automatically.
Example
| Vertex | X | Y | Side | Length |
|---|---|---|---|---|
| A | 486,300.00 | 362,200.00 | A → B | 35.795 m |
| B | 486,335.20 | 362,206.50 | B → C | 35.813 m |
| C | 486,341.80 | 362,171.30 | C → D | 26.577 m |
| D | 486,318.40 | 362,158.70 | D → E | 26.046 m |
| E | 486,296.50 | 362,172.80 | E → A | 27.424 m |
Sum of cross products: −3,125.23; area = 3,125.23 / 2 = 1,562.62 m², i.e. 0 ha 15 a 63 ca; perimeter 151.66 m. This is the example from our guide area of an irregular plot, which also handles it by hand.
Frequently asked questions
How do you calculate an area from coordinates?
By the Gauss method (also called “shoelace”): S = ½ × |Σ (Xᵢ × Yᵢ₊₁ − Xᵢ₊₁ × Yᵢ)|, going through the vertices in order and back to the first. The sign of the sum only shows the direction of travel.
How do you convert m² to hectares, ares and centiares?
1 ha = 10,000 m², 1 are = 100 m², 1 centiare = 1 m². So 1,562.62 m² is written 0 ha 15 a 62.62 ca, or 0.1563 ha.
Why is my area wrong?
Most often, the vertices are not in the order of the outline: the polygon crosses itself. The tool detects it and warns you. Also check that all points are in the same coordinate system.
Is the computed area the one on the title deed?
It is calculated on the projection plane (grid), like official plot areas. A difference of a few m² with the title deed may come from rounded coordinates or an old survey. The legal area is the one on the title deed.