Home › Survey calculations › Radiation

Coordinates by radiation (side shots)

The radiation is the most common survey method with a total station: from a known station, oriented on a reference, each point is sighted (reading Hz, distance, vertical angle V). The tool computes the X, Y, Z of all points, pasted in one go from your field book or Excel.

Angles
Decimal
Station
Orientation
Reference point
Sighted points
Distances

V angle = angle zenithal (100 gon or 90° on the horizontal). It is required with a slope distance; with a horizontal distance it is only used to compute elevations. A prism height in the table replaces the one above for that point.

Result

How to use the calculator

  1. Station: enter the name and coordinates of the point where the instrument is set up, its elevation and the instrument height if you want Z values.
  2. Orientation: choose the reference point sighted (a boundary mark, another station) and the Hz reading taken on it. If you directly know the bearing of the zero V₀, choose that option.
  3. Sighted points: one line per point, with the Hz reading, the distance and the zenith angle V. Paste your whole field book at once from Excel.
  4. Export the coordinates as CSV, TXT (for Covadis or the map) or DXF (points and names, for AutoCAD).

The radiation formulas

Example

Station S1 (486,300.000; 362,200.000; Z 520.000), instrument height 1.55 m, prism 1.60 m. Reference R1 (486,500.000; 362,350.000) sighted with Hz = 0: G(S1→R1) = 59.0334 gon, so V₀ = 59.0334 gon.

PointHz (gon)Di (m)V (gon)XYZ
P125.431045.32098.7520486,343.969362,210.948520.838
P287.120562.105101.2030486,346.478362,158.824518.776
P3152.665038.77099.5010486,292.916362,161.884520.254
P4310.042551.240100.8840486,276.080362,245.308519.239
Always check the orientation: sight a second known reference and compare its computed bearing with its theoretical bearing, or measure the station–reference distance (shown in the result) and compare it with the computed distance.

Frequently asked questions

What is the bearing of the zero V₀?

It is the bearing of the direction where the horizontal circle of the instrument reads zero. It is found by sighting a known point: V₀ = bearing station → reference − reading on the reference. Then the bearing of each point is V₀ + Hz reading.

How do you reduce a slope distance to horizontal?

With the zenith angle V: horizontal distance Dh = Di × sin V, and instrument height difference = Di × cos V. At V = 100 gon (horizontal sight), Dh = Di.

How is the elevation of the points calculated?

Z point = Z station + instrument height + Di × cos V − prism height. Without a station Z, only X and Y are computed.

Can I paste my field book from Excel?

Yes: copy the Point, Hz, Distance, V columns (and prism height if it changes), then paste them into the first cell of the table or with the “Paste from Excel” button. A TXT or CSV file also opens.

Your computed points can go on the map: tap Copy, open the map tool, then Search for a place → By X, Y coordinates → Several points? Paste a list. You see them on the satellite image and export them as DXF, KML or KMZ.

Other survey calculations

Useful guides

Updated on 31 October 2026. Calculations run in your browser: your coordinates are not sent to our servers.