Contour lines for AutoCAD in a few clicks (free DXF)
For a feasibility study, a preliminary road alignment or a location plan, you often need the general relief of the site before any survey. Instead of tracing contours from Google Earth, generate them from a global elevation model and download them as a DXF in your coordinate system.
How to get the contours
- Open the contour lines tool and search for your site.
- Place the yellow frame over the project area (drag its corners or choose a size from 500 m to 5 km).
- Choose the contour interval (for example 1 m, 2 m or 5 m) and the frequency of index contours.
- Click Calculate: the contours appear on the satellite image.
- Choose the coordinate system (UTM or a national grid) and download the DXF.
What the DXF contains
- Contours as 3D polylines at their elevation: Civil 3D and Covadis can build a surface (TIN) from them directly.
- Index contours on their own layer, with elevation labels.
- A frame and a short note with the system, the interval and the data source.
How accurate is it?
The elevations come from a global terrain model (SRTM and other sources). Expect an accuracy of a few metres, sometimes more on steep slopes, in forests or in dense towns. That is fine for a feasibility study, a preliminary design or a location plan. For detailed design, earthworks quantities or anything contractual, use a topographic survey: import your surveyed X, Y, Z points and build the contours from them.
Choosing the interval
- Flat land: 0.5 to 1 m (the model's accuracy is the limit, not the interval).
- Rolling terrain: 1 to 2 m.
- Hills and mountains: 5 m or more, otherwise the lines become too dense to read.
Free and Premium
Calculation, preview and DXF are free, with no account, for an area up to 1 km². Above that and up to 25 km², the preview stays free and the DXF is part of Premium.
Frequently asked questions
Can I open the contours in Civil 3D?
Yes. The DXF (R12) opens in AutoCAD, Civil 3D, BricsCAD, QGIS and Covadis. Add the 3D polylines to a surface as contour data.
Is this the same as Google Earth elevation?
Both come from global elevation models of similar accuracy. The advantage here is that you get real contour polylines in your coordinate system instead of tracing them by hand.
Can I get spot heights too?
Yes, a grid of spot heights can be added to the DXF, and the map tool shows the elevation of any point you click.