← All guides · Updated on 9 November 2026

Get the elevation (Z) of points from their coordinates

You have the position of points but not their height: a pipeline route, the corners of a plot, the vertices of a road. A global terrain model gives a first value of the elevation, good enough for preliminary work.

On the map

  1. Open the map tool and turn on Elevation on click: click anywhere to read the ground elevation and the slope.
  2. Every point, line and polygon you draw or import gets a Z elevation on each vertex.
  3. Export to DXF (3D polylines and points at their elevation) or to a TXT / CSV list of N, X, Y, Z.

For a list of points, paste it (name, X, Y) in Search for a place → By X, Y coordinates → Paste a list: the points are placed on the map with their elevation, ready to export.

Where the elevations come from

The values come from a global elevation model (AWS Terrain Tiles, built mainly from SRTM and other national models), interpolated between grid cells. The model describes the ground surface averaged over cells of tens of metres, and includes some effect of buildings and trees.

How accurate?

Good for feasibility studies, preliminary profiles and location plans. For levels used in design (drainage slopes, earthworks, floor levels), use a levelled or GNSS survey.

Going further

Generate contour lines as DXF over the same area, or read our guide on contour lines for AutoCAD.

Frequently asked questions

Is the elevation above sea level?

Yes, heights are approximately above mean sea level (geoid). GNSS receivers give ellipsoidal heights unless a geoid model is applied: the two can differ by tens of metres.

Can I replace the model values with my survey?

Yes: import your surveyed X, Y, Z points; their own Z is kept.

Does it work everywhere?

Yes, the model covers the whole world, with the best detail where national high-resolution models exist.

Open the map tool

Related guides

Contour lines for AutoCAD in a few clicks (free DXF)Measure the area of a piece of land on a satellite mapPlot survey coordinates from Excel into AutoCAD (with names and Z)