Home › Tools › Coordinate converter › Morocco Lambert ↔ GPS

Convert Morocco Lambert coordinates to GPS

You have coordinates X, Y in Lambert on a plan and want to find them on Google Maps or in a GPS? Choose the zone, enter X and Y: the latitude and longitude appear immediately, in decimal degrees and in degrees, minutes, seconds. The reverse also works.

Decimal
Calculated in your browser, nothing is sent.
File

Loading the calculation module…

Which Lambert zone should I choose?

Morocco uses four Lambert zones, all on the Merchich datum:

The zone is shown on the plan. If the converted point falls outside the intended zone, the tool warns you: it is often the sign of a wrong zone or of swapped X and Y.

Examples

PlaceLatitudeLongitudeZoneX (m)Y (m)
Meknes (El Hedim square)33.8935−5.5658Zone 1484,520.10366,107.68
Fez34.0331−5.0003Zone 1536,753.03381,646.21
Marrakech (Koutoubia)31.6237−7.9937Zone 2253,743.09516,256.55
Agadir30.4202−9.5982Zone 296,708.52387,395.19
Laayoune27.1536−13.2033Zone 3427,011.43540,100.16
Dakhla23.6848−15.9580Zone 4424,017.92569,329.51

From GPS coordinates to a grid

Tap ⇄ to swap: WGS84 as source, your grid as target. Latitude and longitude can be written in decimals (33.8935) or in degrees, minutes, seconds (33°53'36.6"N); for west, use a minus sign or the letter W (5°33'56.9"W).

Precision

The Merchich ↔ WGS84 transformation uses the official three-parameter shift (31, 146 and 47 m). It is accurate to a few metres: enough to locate a plot, not for a boundary survey.

To go further: the guide convert GPS coordinates to a grid and the article the 4 Lambert zones of Morocco.

Frequently asked questions

How do I know if my plan is in zone 1 or zone 2?

Look at the title block of the plan or the title deed. Otherwise: north of the country (above about 31.5° N) in zone 1, centre and south down to Tarfaya in zone 2, Laayoune and Boujdour in zone 3, Dakhla and the south in zone 4.

Why do my points fall in the sea?

The chosen zone is wrong, or X and Y are swapped. The tool flags it and offers to swap X and Y in one click.

Is the result accurate enough for a boundary survey?

No. The official Merchich ↔ WGS84 transformation is accurate to a few metres. A boundary survey needs a survey tied in by a licensed surveyor.

Can several points be converted?

Yes, “Point list” tab: paste your points from Excel and download the result as Excel, CSV, DXF or KML.

Other conversions

Other tools

Updated on 4 November 2026. The calculation runs in your browser: your coordinates and files are not sent to our servers.