← All guides · Updated on 9 November 2026

How to make a site location plan from a satellite image

Building permits, utility applications and project reports often ask for a location plan showing the site and its surroundings. With a georeferenced satellite image and a few automatic layers, you can prepare it in AutoCAD in minutes instead of hours.

What a location plan usually shows

Common scales: 1:2,000 to 1:5,000 for a location plan, 1:200 to 1:500 for a site plan.

Step by step

  1. Locate the site in the map tool (place name, GPS position or X, Y coordinates).
  2. Draw the boundary with the polygon tool, or type the coordinates of the corners if you have them. The area and perimeter are shown.
  3. Import buildings and roads of the surroundings (buildings and roads tool).
  4. Add the relief if needed: contour lines as DXF for the same area.
  5. Download the satellite image with its DXF (georeferenced image guide).
  6. Export the drawing to DXF in the coordinate system required by the authority (UTM or national grid).
  7. In AutoCAD, insert the image DXF and the contours into the same drawing: everything lines up because everything is in the same coordinates. Add the layout, title block, north arrow and scale bar.

Tips

Frequently asked questions

Is a satellite-based plan accepted by authorities?

For a location plan it usually is, as long as the boundary and coordinates come from reliable data. For a site plan with dimensions, setbacks or levels, most authorities require a survey by a licensed surveyor.

Which coordinate system should I use?

The one required by the local authority or the land registry, often a national grid. Otherwise UTM.

Can I do it on a phone?

The map tool works on phones and tablets for locating, drawing and exporting; the final layout is easier on a computer in AutoCAD.

Open the map tool

Related guides

Download a georeferenced satellite image for AutoCADA CADMapper alternative for surveyors: buildings and roads as DXFMeasure the area of a piece of land on a satellite map