Home › Survey calculations
Online survey calculations
The surveyor’s everyday calculations, free and with nothing to install: bearing, coordinates, radiation, intersections, traverse, area and setting out. In grads (gon), in degrees or DMS, with the detail of the calculation, a diagram and CSV, TXT or DXF export.
New: water supply and sewer quantity take-off. Drop the DXF of your Covadis longitudinal profiles or paste your levels: excavation, sand, backfill, manholes and bill of quantities in Excel. Open the take-off →
Bearing and distanceBearing, back bearing, distance, height difference and slope between two X Y (Z) points.
X, Y coordinatesThe “open point”: coordinates of a point from a known point, a bearing and a distance.
RadiationStation, orientation, Hz readings, distances and V angles: X, Y, Z of all surveyed points.
Line intersectionTwo lines (through two points or point + bearing): the intersection point and the angle between them.
Circle–line and two circlesLine and circle, or two circles (point placed by two distances): the 0, 1 or 2 intersection points.
TraverseClosed between known points, loop or open: angular and linear misclosure, precision 1/N and adjusted coordinates.
Area from coordinatesArea in m² and ha a ca, perimeter, sides and bearings from the X Y of the vertices.
Setting outHz reading to set and distance of each point from the station: the setting-out sheet.
Angle conversionGrads (gon), decimal degrees, degrees-minutes-seconds and radians, in every direction.
Built for the field and the office
- Grads, degrees or DMS: choose the unit once, it is kept for all calculations. Angles already entered are converted.
- Paste from Excel: your field books, point lists and coordinates paste in one go, with a decimal point or comma.
- Instant result, with the detail of the calculation to check or learn, and a diagram to spot a mistake.
- Export as CSV for Excel, TXT for Covadis or the map, DXF for AutoCAD, or print the sheet.
- Nothing is sent: calculations run in your browser, and your latest entries stay on your device.
Conventions used
- X = East (easting), Y = North (northing), in metres, as in UTM, Merchich Lambert or Lambert 93.
- Angles are in grads (gon) by default, the surveyors’ unit in France and North Africa: 400 grads for a full circle, 100 grads for a right angle. One button switches everything to degrees or DMS.
- The bearing is counted from grid north, clockwise, from 0 to 400 grads (or 360°).
- The horizontal angles are readings or clockwise angles; the vertical angle is zenithal (100 gon on the horizontal).
- Distances are horizontal, except in the radiation tool, which reduces slope distances itself.
And to draw on the map?
The computed points are placed on the satellite image with the map tool: copy the result, then paste it into By X, Y coordinates → Several points?. You draw, measure and create contour lines and export to DXF for AutoCAD.