Home › Tools › Coordinate converter › UTM ↔ Morocco Lambert

Convert UTM coordinates to Morocco Lambert

Your GPS, drone or total station gives UTM coordinates, but the drawing must be in Merchich Lambert? Enter the UTM zone, choose the Lambert zone: X and Y are converted at once, one by one or as a list.

Decimal
Calculated in your browser, nothing is sent.
File

Loading the calculation module…

UTM zones in Morocco

The same point has very different UTM X values depending on the zone: Meknes is X = 817 608.60 in 29 N but X = 262 728.42 in 30 N. So state the zone of your data. For the output, the “auto” option takes the zone of the point.

Example

PlaceUTM XUTM YZoneLambert Z1 XLambert Z1 Y
Meknes817 608.603 755 659.3529 N484 520.10366 107.68
Casablanca626 848.643 719 553.2229 N292 731.01336 676.89
Fez315 334.183 767 630.6030 N536 753.03381 646.21

Why the two systems do not match

UTM is based on GPS (WGS84); Moroccan Lambert on the older Merchich datum, shifted by about 160 m. The converter applies this datum shift with the official parameters, then the projection of the chosen zone.

For a complete survey, convert the file directly: changing the coordinate system of a DXF keeps the whole drawing.

Frequently asked questions

Which UTM zone for Morocco?

29 N for the centre and the west, 30 N for the east (east of 6° W), 28 N for the Sahara west of 12° W.

My GPS shows UTM 29S, is that the south?

No: the letter S on some GPS units is a latitude band, not the hemisphere. Morocco is in the northern hemisphere: choose “North”.

Can I convert a DXF file from UTM to Lambert?

Yes, with the file converter: choose UTM and the zone as the system of the file, the Lambert zone as the target system, and download the converted DXF.

Other conversions

Other tools

Updated on 10 November 2026. The calculation runs in your browser: your coordinates and files are not sent to our servers.