Google Earth to AutoCAD: convert a KML or KMZ to DXF
You traced a boundary, a road or a pipeline in Google Earth and now need it in AutoCAD, at the right place and in metres. Google Earth saves KML or KMZ files in latitude and longitude; AutoCAD needs projected coordinates. Here is how to convert one into the other in a minute.
Why you cannot just open a KML in AutoCAD
A KML stores every vertex as longitude, latitude in degrees (WGS84). A survey drawing uses projected coordinates in metres: UTM, a state plane, a national grid such as British National Grid, Lambert 93 or Merchich Lambert. The conversion must go through a map projection, otherwise distances and areas are meaningless and the drawing will not overlay your survey.
Step 1: save your shapes from Google Earth
- In Google Earth Pro, right-click the folder or the shape in Places, then Save Place As…
- Choose KML or KMZ (a KMZ is simply a zipped KML; both work).
- In Google Earth on the web, open the project menu and export it as a KML file.
Step 2: convert the KML to DXF
- Open the file converter and drop the KML or KMZ file.
- The source system is set to WGS84 automatically (a KML is always in WGS84).
- Choose the target system: the UTM zone of your site (the zone is suggested from the position of the file) or your national grid.
- Download the DXF. A preview shows the drawing and the first converted points.
Prefer to see the result on the satellite image first? Open the map tool, import the KML in Import and export, check it on the map, choose the system and export the DXF from there. You can also add points, measure and draw before exporting.
Step 3: open the DXF in AutoCAD
Open the DXF directly (File → Open, file type DXF). The drawing is at its real coordinates, in metres: 1 drawing unit = 1 metre. Use ZOOM → Extents if you do not see it. Lines and polygons become polylines; placemarks become points, with their name as a text next to them.
Which coordinate system should I choose?
- Your project already has a system (title block, survey report, client brief): use exactly that one.
- No imposed system: UTM is a safe choice almost everywhere. The zone number is
floor((longitude + 180) / 6) + 1; north or south depends on the hemisphere. - Read our guide UTM to latitude and longitude if you are unsure about zones.
Common problems
- The drawing is far from my survey: wrong target system or UTM zone. Convert again with the system of your survey.
- The DXF is empty: the KML only contained an image overlay or a network link. Export the shapes themselves (paths, polygons, placemarks).
- Curves look jagged: Google Earth stores curves as straight segments; the DXF keeps exactly the same vertices.
Frequently asked questions
Can I convert a KMZ file?
Yes. A KMZ is a zipped KML: the converter and the map tool open it directly.
Is the DXF to scale?
Yes. Coordinates are projected in metres, so distances and areas measured in AutoCAD are real ground values in the chosen projection.
Does it keep the names of the placemarks?
Yes: placemark names are kept as texts next to the points, on their own layer (NOMS).
Can I do the opposite, DXF to Google Earth?
Yes: use the DXF to KML converter, give the system of the DXF and open the KML in Google Earth.