Convert UTM coordinates to latitude and longitude
GPS receivers and Google Maps give latitude and longitude; survey drawings use UTM eastings and northings in metres. Converting between them is simple once you know the zone and the hemisphere.
The quick way
- Open the coordinate converter.
- Choose UTM as the source system, with the zone and the hemisphere (north or south).
- Type the easting (X) and northing (Y), or paste a list of points from Excel.
- Read the latitude and longitude in decimal degrees and in degrees, minutes, seconds. Tap ⇄ to convert the other way.
How UTM works
- The world is cut into 60 zones, each 6° of longitude wide, numbered from 1 (180° W) eastwards.
- Zone number:
floor((longitude + 180) / 6) + 1. Example: longitude −7.6° → zone 29. - Each zone has a central meridian with a false easting of 500,000 m: eastings range roughly from 160,000 to 840,000 m.
- Northings start at 0 at the equator in the northern hemisphere; in the southern hemisphere a false northing of 10,000,000 m is added.
- Some systems add a latitude band letter (C to X). Bands N and above are in the northern hemisphere.
Common errors
- Points in the sea or in another country: wrong zone or wrong hemisphere.
- X and Y swapped: an easting has 6 digits, a northing usually 7 (except close to the equator).
- Different datum: UTM on WGS84 and UTM on an older local datum (ED50, Nord Sahara, Arc 1960…) can differ by 100 m or more. Use the system named on your plan.
- Degrees written as decimals: 33°30′ is 33.5°, not 33.30°.
Many points at once
Paste your list (name, X, Y, Z) from Excel in the Point list tab: the separator is detected, swapped X and Y are spotted, and the result downloads as Excel, CSV, DXF or KML. For a whole DXF or KML file, use the file converter.
Frequently asked questions
Which UTM zone am I in?
Use the formula floor((longitude + 180) / 6) + 1, or let the converter suggest it from a GPS position. Large countries span several zones; projects usually stay in the zone of their centre.
How accurate is the conversion?
UTM ↔ latitude / longitude on the same datum is exact to the millimetre. Changing datum (for example from an old national datum to WGS84) depends on the published transformation parameters.
Can I convert degrees, minutes, seconds?
Yes: type 33°53′36.6″N or 33.8935, and use a minus sign or W / S for west and south.