Home › Survey calculations › Setting out

Setting-out calculation for points (total station)

To set out a building, axes or boundary marks with a total station or theodolite: enter the station, the reference and the coordinates of the points to set out. For each one, the tool gives the Hz reading to set and the horizontal distance to transfer, ready to print.

Angles
Decimal
Station
Orientation
Reference point

Usually 0: the zero is set on the reference.

Points to set out

Result

How to use the calculator

  1. Enter the station: the known point where you set up the instrument.
  2. Choose the orientation: the reference point sighted and the reading you set on it (often 0), or directly the bearing of the zero.
  3. Paste the points to set out (name, X, Y) from Excel or from your plan.
  4. Print the sheet with Print, or export it as CSV to open it in Excel.

The formulas

Example

Station S1 (486,300.000; 362,200.000), reference R1 (486,500.000; 362,350.000) with 0 set: V₀ = 59.0334 gon, distance S1–R1 = 250.000 m (to check in the field). The four corners of a building:

PointXYHz reading (gon)Distance (m)
B1486,320.000362,230.000378.400036.056
B2486,335.000362,222.0005.241841.340
B3486,328.500362,209.80019.882130.138
B4486,313.500362,217.800382.275122.340
The coordinates must be in the same system as the station and the reference. Over long distances, take into account the scale factor of the projection and the elevation, which can change distances by several centimetres per kilometre.

Frequently asked questions

How do you calculate the setting-out data for a point?

Calculate the bearing and distance from the station to the point. The reading to set is Hz = bearing of the point − bearing of the zero V₀ (modulo 400 gon), with V₀ = bearing of the reference − reading set on the reference.

What reading should be set on the reference?

The simplest is 0: sight the reference and set the circle to zero. You can also set the bearing of the reference directly; the readings then become the bearings of the points.

How do you check a setting out?

Before you start, measure the station–reference distance and compare it with the computed distance shown in the result. After setting out, check the distances between the set-out points (diagonals of a building, for example) or shoot the points from another station.

Can I send the points directly to the total station?

Yes: export the coordinates as CSV or TXT and load them into the instrument (manufacturer software), which will compute the setting out itself. Our guide explains how to prepare this file.

Your computed points can go on the map: tap Copy, open the map tool, then Search for a place → By X, Y coordinates → Several points? Paste a list. You see them on the satellite image and export them as DXF, KML or KMZ.

Other survey calculations

Useful guides

Updated on 31 October 2026. Calculations run in your browser: your coordinates are not sent to our servers.